Taylor Made Boat Fender for Bass Boats - 15" Tall x 5-1/2" Wide - Black Vinyl
(14 reviews)
Price: $36.73
Taylor Made Boat Fender for Bass Boats - 15" Tall x 5-1/2" Wide - Black Vinyl
Item # 36931006
Retail:$42.25
Our Price: $36.73
You Save: 13%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (14)
- Q & A (0)
- Videos (1)
- Photos
Taylor Made Boat Bumpers - 36931006
- Freeboard
- 10 - 15 Feet Long
- Inflatable
- Metallic Black
- 0 - 5 Inch Wide
- 11 - 20 Inch Long
- Taylor Made
- Vinyl
Tie this L-shaped fender onto the cleat of your bass boat to protect your gunwale and rubrail from bumping high docks. It's also great for ski boats or other boats with low freeboards. Marine-grade vinyl is durable and long-lasting.
Features:
- Inflatable fender sits over the side of your boat to prevent damage to the hull
- Designed for bass boats, ski boats, and other boats with low freeboards
- L-shape allows fender to sit higher than a standard hanging fender
- Protects your boat's gunwale and rubrail from high docks
- Simple installation - just attach to your boat's cleat with fender rope (not included)
- Black, marine-grade vinyl is more durable and abrasion resistant than rubber fenders
- Easy to inflate with hand pump (3691005 - sold separately)
- Integrated inflation valve won't chip off or unglue
- Made in the USA
Specs:
- Dimensions: 15" tall x 5-1/2" wide
- Eyelet diameter: 11/16"
- 1-Year limited warranty
31006 TaylorMade Small Fishing Boat Bumper - 15" Long x 15.5" Wide - Metallic Black Vinyl
California residents: click here
Video of Taylor Made Boat Fender for Bass Boats - 15" Tall x 5-1/2" Wide - Black Vinyl
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Taylor Made Boat Bumpers - Fender for Bass Boat - 36931006
Ellen: Hey everybody. I'm Ellen here at etrailer.com and we're going to be taking a quick look at the Taylor Made fender for bass boats. This is going to help to keep your boat protected from making contact with other boats or your dock or anything else, just helps to give you that kind of bumper going around the side of your boat. And this is going to have that unique design to let it sit higher than a fender that was just slung over the side, hanging there. So this is going to give protection for that corner to make sure that you don't have any issues with that.It's a pretty straightforward install, just use some rope to attach it to a cleat on your boat. You can air it up with the valve there that's integrated into the side.
So the nice thing about that is that there's no stem that can stick up and get knocked off or unglued. So pretty long lasting there, just uses a needle style attachment to go in. Typical for any kind of bike pump that you might have. It's usually an attachment. If you need a hand pump to use with this, we do have that sold separately here at etrailer.com.
You can find that part number listed on the product page.It's made out of a durable black vinyl, which is marine grade. So this is going to last longer and have better abrasion resistance than your typical rubber construction. As far as the overall size, it's about 15 inches long going from the top to the very end there. Of course, mine is not fully inflated right now. It's just kind of sort of half inflated, I guess.
So as you bulk it up, it could be a little bit bigger. And then the width is right about five inches, maybe three and three quarters. The eyelet the top is 11 16ths in diameter, and this is made in the USA. That's pretty much all there is to it for our look at the Taylor Made boat fender for your bass boats. I hope this video has been helpful in deciding if this is the right accessory for you.
We do have a lot of other accessories for your boats here at etrailer.com. So check them out. Thanks for watching.
Customer Reviews
Taylor Made Boat Fender for Bass Boats - 15" Tall x 5-1/2" Wide - Black Vinyl - 36931006
Average Customer Rating: 4.9 out of 5 stars (14 Customer Reviews)
Tie this L-shaped fender onto the cleat of your bass boat to protect your gunwale and rubrail from bumping high docks. It's also great for ski boats or other boats with low freeboards. Marine-grade vinyl is durable and long-lasting.by: Edward 12/07/2023
Works great on bass boat for
by: Joe 09/27/2023
excellent product perfect for protecting a bass boat with its wrap over design
makes docking a breeze.
by: Rick 08/25/2023
Fast delivery. Excellent quality
by: Brandt09/24/2021
Boat fenders as expected and will work for their intended purposes.
by: James 07/23/2022
Perfect for my 16/17 /Boston Whaler, I wish this was in a 12inch version as space is a premium in low gunwale boat.
by: Dale 04/27/2021
fits my nitro z21 perfectly
by: Janice 07/13/2022
by: Jimmy 01/29/2021
by: Frank 09/06/2023
I have a center console they work great !!
by: Joseph 08/31/2020
The gunnels sit low on my boat. The position of the cleat make it difficult for a regular bumper to protect the boat. These work great.
by: Bud 02/21/2020
product was just what expected and service was great as usual.
by: Brian 03/28/2021
by: William 02/05/2021
Quick turn around time ! Everything!
by: Theodore 10/09/2022
14
14
See what our Experts say about this Taylor Made Boat Bumpers
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.